DIY: Applying Pre-glued Edging

05 April 2018

Posted by:

Gansbaai Build it Plus

Posted in:

Step 1: Prepare Surface Edge

Fill any large holes
Sand rough spots
Remove sawdust
Cut edging 1.5cm longer than surface to be covered

Step 2: Apply Edging

Preheat iron on “cotton” setting
Position edging
Slowly press iron over length of edging
Check to see if glue is melting

NOTE: Use craft paper or aluminium foil to protect iron bottom.

Step 3: Bonding

Whilst still hot, press edging down firmly with wood block or roller
If mistakes should occur, simply reheat and reapply

Step 4: Trim Edge

Allow edging to cool completely
Trim excess with an edge trimmer or utility knife
Sand wood veneer smooth and finish as desired

Written by:

Gansbaai Build it Plus forms part of the fastest-growing hardware and building materials group in Southern Africa. The Build it name embraces all activity within the hardware and building industry and supplies quality building materials at the best possible prices for large and small-scale building ...

View Profile

What is Xplorio?

Xplorio is your local connection allowing you to find anything and everything about a town.

The Timeless Beauty of Natural Stone: Travert...

There is nothing that speaks, timeless elegance, quite like natural stone.

Posted by Gansbaai Build it Plus

Stone Mosaic and Wall Cladding Tiles

Natural Stone has been used for millennia across the globe for decorative purposes, it never loses its beauty and adds a timeless elegance to any structure.

Posted by Gansbaai Build it Plus